AT&T OneVision DEFINITY G3 Fault Management and integration, Руководство пользователя

Страница: 38 / 153

Customizing Fault Management
3-4 Issue 2 April 1996
Changing Colors
The Setup screen allows you to change the color settings for:
■
Alarm conditions
■
Circuit pack information on the configuration map
You can:
■
Select any color available to your monitor.
■
Specify a hexadecimal RGB color value.
■
Select a gray-scale instead of colors. This feature is designed for users
who are color-impaired or who have monochrome monitors.
Double click on a table icon for more information:
Table 3-2. Color Fields on the Setup Screen
Field Default Color Default Grey Scale
Major Alarm Color Red 0% Grey
Minor Alarm Color Orange 55% Grey
Warning Alarm Color Yellow 80% Grey
Circuit Pack Mismatch Color Blue 0% Grey
Highlight Color Green 0% Grey
Circuit Pack Select Color Cyan 0% Grey
Table 3-3. Procedure for Changing Colors
Use the following steps to change the default color settings:
1. Enter either the color name or the hexadecimal RGB color value in the
appropriate color field.
Hint: Enter the RGB color value in the #RRGGBB format.
(RR = red, GG = green, BB = blue)
Example: #FF0000 = red
See Table 3-2 for information about default color settings.
2. Click Apply to test your changes.
3. Select Options
à
Save to save your changes for future sessions.