AT&T MERLIN MAIL, Руководство по системному программированию и обслуживанию

Страница: 140 / 224

MERLIN LEGEND System Programming
Step Instruction MLX-20L PC
1 . Enter programming mode.
[Menu] [S][P][M]
[Enter]
[any key]
Sys Program
[F1]
Exit
[F5]
2. Select Extensions.
Extensions
[F6]
3. Display next page of menu.
[More]
[PgUp]
4. Select Group Calling.
Grp Calling
[F4]
5. Select Hunt Type.
Hunt Type
[F1]
6. Enter extension number of
[nnn] [nnn]
the MERLIN MAIL — ML
Enter
[F10]
Calling Group.
7. Specify linear hunt type.
Linear
[F2]
Enter
[F10]
8. To return to previous menu
[F5]
Transfer Return Time
Exit
The Transfer Return Time is the number of rings that occur before a
transferred call returns to the extension from which it was transferred.
If all stations are covered only by the MERLIN MAIL—ML system, the Transfer
Return Time should be set to a value greater than the Coverage Delay. If any
station has personal coverage and group coverage by the MERLIN MAIL—ML
system, set the Transfer Return Time to a value greater than the sum of the
Coverage Delay and Delay Ring intervals.
■
Use MERLIN LEGEND Form 6f to identify the Transfer Return
Interval.
■
The factory setting is 4 rings.
4-4
Group-Assigned Features