AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 781 / 887

General Feature Use and Telephone Programming
System Programming
D–3
Feature Codes
Feature codes are 1-, 2-, and 3-digit codes that activate features. A feature code
is used by first pressing the dedicated
Feature button on MLX telephones;
pressing a programmed Feature button on analog multiline telephones; dialing
#
on single-line telephones. Each of these methods sends a signal to the system
that a feature code is about to be dialed. When the code is dialed, the feature is
activated.
NOTE:
Queued Call Console (QCC) system operators cannot use feature codes.
The following features can be used only by dialing feature codes:
■
Call Pickup
■
Forward/Follow Me—Cancel One
■
Forward/Follow Me—Cancel All
■
Message Cancel
■
Personal Speed Dial
■
System Speed Dial
NOTE:
Pressing the Conference , Transfer , Speaker , or Feature button while activating
a feature cancels the process. Pressing any other button, such as the Mute ,
HFAI , Message Status , DSS Page , More , Message , Clock , analog multiline
display keys, or analog multiline disconnect button does not cancel the feature
activating process.
Feature Table
Table D–1 lists the telephone and operator features that can be assigned to
telephones or consoles through Centralized Telephone Programming or by users
from their telephones.