AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 701 / 887

Integrated Administration
Programming Procedures
4–329
If extension numbering is changed on the switch (using the MLX-20L console or
SPM), the switch and the application database will no longer be in agreement.
To reduce the chance that such changes will disrupt communication between
the switch and the application(s), Integrated Administration includes an
automatic reconciliation program that runs every day at 3:00 a.m. The program
compares the application database to the switch programming and brings the
two into agreement. The program makes changes, as necessary, only to the
application database, according to the rules listed in Table 4–7. The
reconciliation program does not change the switch programming.
In a Release 2.0 or earlier system with Integrated Solution III Version 1.0 or
1.1, use the System Renumbering feature cautiously. When this feature is
used, all messages and greetings for users that have been renumbered are
erased from AUDIX Voice Power when the automatic reconciliation program
runs at 3:00 a.m.
NOTE:
The reconciliation program is disabled in IS III Version 1.2.
Table 4–7. Database Reconciliation Rules
Extension appears in ...
Switch
Application Database Action
yes yes None
yes no Extension is added to database. Can be
added as AUDIX Voice Power or AUDIX
Voice Power/FAX Attendant subscriber
through Extension Directory screen.
no yes
(regular extension) Extension is deleted from database and
removed as an AUDIX Voice Power or
AUDIX Voice Power/FAX Attendant
subscriber.
no yes
(special extension) Extension is retained as special-purpose
extension in database.
yes yes
(special extension) Extension is converted from special-
purpose extension to regular extension in
database.
When you finish programming the common information, you can complete any
remaining system programming procedures. See the
Feature Reference for
additional information on Integrated Administration.