AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 513 / 887

PRI Facilities
Programming Procedures
4–141
■
Miscellaneous Procedure
Console Display/Instructions Additional Information PC
1 Specify a service.
B-Channel Group xx:
xx = number entered in Step 5
Select one
_
Other
If you select
CallByCall
CallByCall
, you have
_
CallByCall
finished this procedure. Go to Step 7
Select
Other Other
or
1
Exit Enter CallByCall CallByCall
.
2
2 Save your entry.
Select
Enter Enter
.
0
3 Erase the current network service code.
B-Channel Group xx:
xx = group number entered in Step 5
Enter Network Service
(5 digit code of 0,1)
nnnnn
Backspace
Exit
Enter
Select Drop .
A+P
4 Enter the five-digit network code that corresponds to the selected service.
Dial or type [ nnnnn ].
Û
5 Save your entry.
Select
Enter
Enter
.
0
6 Repeat Steps 5 through 7 of the main procedure for each miscellaneous service
group number.
7 Return to the System Programming menu.
Select
Exit
Exit
four times.
5555
Copy Telephone Number to Send
Use this procedure to indicate whether or not the telephone number to send to
the network (for calls going out over ISDN lines assigned to a B-channel group)
is copied from the number assigned to that channel.
Select
Do Not Copy Phone Number
when a telephone number to send is
assigned to each channel in the B-channel group or when no telephone number
is to be sent to the network. In the latter case, make sure that there are no
telephone numbers assigned to any channels in the B-channel group by using
the “Telephone Number to Send” procedure.