AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 414 / 887

Lines and Trunks
4–42
Programming Procedures
Console Display/Instructions Additional Information PC
3 Assign or remove the line/trunk.
Select
Enter Enter
or
0
Delete
Delete
.
8
You may continue to assign or remove a
long disconnect interval from additional
lines/trunks by repeating Steps 2 and 3.
4 Return to the System Programming menu.
Select
Exit Exit
.
555
◆
Block Procedure
1 Specify the block of 20 lines associated with 20 buttons on the system
programming console.
Select
Lines 01-20 Lines 01-20
1
Lines 21-40 Lines 21-40
2
Lines 41-60 Lines 41-60
3
Lines 61-80 Lines 61-80
.
4
2 Specify touch-tone or rotary signaling for each block.
Toggle the green LED on or
off as required.
On = long hold disconnect interval.
Off = short hold disconnect interval.
3 Return to the System Programming menu.
Select
Exit Exit
.
555
Principal User for Personal Line
Use this procedure to assign or remove one telephone as principal user for a
personal line. When a telephone with Remote Call Forwarding activated is
assigned as principal user, calls received on the personal line are forwarded to
an outside telephone number. In addition, calls received on that line are sent to
that telephone’s individual and/or Group Coverage receivers unless the personal
line button is set to No Ring.
The principal user assignment must be removed before the trunk can be
removed from a button on the telephone.
When no principal user is assigned for a personal line, calls received on the
personal line are not forwarded to outside telephone numbers; calls received on
the personal line follow the coverage patterns for all users who share the line.