AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 391 / 887

System Renumbering
Programming Procedures
4–19
Page button assignment should be sequential. If only one DSS is attached, each
Page button assignment sets the console for a range of 50 extension numbers:
Page 1: 0 to 49; Page 2: 50 to 99; Page 3: 100 to 149.
If two DSSs are attached, each Page button assignment sets the console for a
range of 100 extension numbers. If two DSSs are attached to the console,
change the factory setting so that the difference between extension numbers
assigned to the range is at least 100. For example, assign Page 1 to begin with
extension 10, Page 2 to begin with extension 110, and Page 3 to begin with
extension 210.
Operator Park Zone codes must be included in the extension number range
specified for one of the
Page buttons.
!
CAUTION:
Select
Exit
on the console or
5
on the PC when you have finished this
procedure. If you press Home , extensions may remain in the forced idle
condition (the LED next to each DSS button is on), and the system may
have to be restarted.
Summary: Assign Direct Station Selector Page
Buttons
Programmable by System manager
Mode All
Idle Condition Not required
Planning Form Form 6a, Optional Operator Features
Factory Setting Page 1=0; Page 2=50; Page 3=100
Valid Entries 1, 2, 3
Inspect Yes
Copy Option No
Console Procedure
SysRenumber
®
Single
®
More
®
DSS Buttons
®
Dial page
no.
®
Enter
®
Dial first ext. no.
®
Enter
®
Exit
®
Exit
PC Procedure
2
®
2
®
u
®
1
®
Type page no.
®
0
®
Type first
ext. no.
®
0
®
5
®
5