AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 230 / 887

Optional Telephone Features
3–94
Common Administrative Procedures
Console Display/Instructions Additional Information PC
3 Enter the logical ID of the first extension in the block to which you want to copy
call restrictions (
nnn = 1 to 144).
Copy extension xxxx To:
xxxx = extension entered in Step 4
Enter starting extension
Logical id (1 - 144)
Backspace
Exit
Enter
Dial or type # [ nnn ].
Û
4 Save your entry.
Select
Enter Enter
.
0
5 Enter the logical ID of the last extension in the block ( nnn = 1 to 144).
Start at extension xxxx:
xxxx = extension entered in Step 1
Enter ending extension
Logical id (1 - 144)
Backspace
Exit
Enter
Dial or type # [ nnn ].
Û
6 Save your entry.
Select
Enter Enter
.
0
7 Return to the System Programming menu.
Select
Exit Exit
three times.
555
ARS Restriction Level For Extensions
Use this procedure to assign an ARS restriction level to an extension. Outgoing
calls can only be made to routes that have a Facility Restriction Level (FRL)
lower than or equal to that of the extension where the call is being made. Only
outgoing calls are affected; users can receive inside, local, and toll calls on
restricted telephones and can join any type of call in progress.
The restriction level assigned to extensions is opposite to the FRL assigned to
routes, where 0 is the most and 6 is the least restrictive.
Summary: Assigning ARS Restriction Level For
an Extension
Programmable by System manager
Mode Hybrid/PBX only
Idle Condition Not required