AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 212 / 887

Telephones
3–76
Common Administrative Procedures
Console Display/Instructions Additional Information PC
3 Specify the extension.
BIS/HFAI Extensions:
If no DSS is attached :
Enter extensions
SP: “Entering an Extension”
Û
If DSS is attached :
Delete
Toggle the red LED on or
Backspace
off as required. Go to Step 5.
Exit Enter
On = telephone has BIS/HFAI capability.
Off = telephone does not have BIS/HFAI
capability.
4 Assign or remove BIS/HFAI capability.
Select
Enter
Enter
or
0
Delete Delete
.
8
You may continue to assign or remove
BIS/HFAI capability to additions
extensions by repeating Steps 3 and 4.
5 Return to the System Programming menu.
Select
Exit
Exit
two times.
55
Analog Multiline Telephones with Voice
Announce to Busy
Use this procedure to dedicate a voice or voice pair to be used to provide the
Voice Announce to Busy feature to an analog multiline telephone.
The extension number associated with the first (odd-numbered) extension jack in
the pair is the telephone's extension number. The extension number for the
second (even-numbered) extension jack is dedicated to the Voice Announce to
Busy feature. Calls cannot be placed to the extension jack reserved for the Voice
Announce to Busy feature.
Voice Announce to Busy must be disabled at data stations.
NOTE:
This procedure does not apply to MLX telephones (Voice Announce to Busy is
automatically provided) and cannot be programmed for single-line telephones.