AT&T MERLIN LEGEND Release 3.1, Руководство по системному программированию

Страница: 123 / 887

System Programming
Programming with SPM
2–45
■
Assign labels to a personal directory.
■
Use centralized telephone programming.
When the extension is forced idle, the following occurs: multiline telephone users
hear a reminder tone that indicates the telephone cannot be used; display
telephone users see the message
Wait: System Busy
; single-line telephone
users do not hear a dial tone.
Forced Idle Reminder Tone
The forced idle reminder tone is a high-low “door-phone” tone
¾
400 ms of 667
Hz tone followed by 400 ms of 571 Hz tone. The tone is provided under the
following circumstances:
■ At the extension, to remind the user that the system or the extension is in
the forced idle state
■ At the programming console or at a PC running SPM, to remind the
system manager that the system (or at least one extension) is in the
forced idle state because of administrative activity
In Release 1.1 and higher of the communications system, forced idle reminder
tones occur every 20 seconds. You can adjust the volume of these tones with
the volume control on the system console.
Accessing System Programming
Follow the steps below to access system programming.
1 At the SPM Main Menu press
1
to select
Sys Program
.
SPM Main Menu
Menu: Select Function
1
Sys Program Maintenance
Backup Restore
Boards Pass-Thru
Print Opts Password
Monitor Language