AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 84

Страница: 84 / 152

Features

Barge-In

If a co-worker is on the phone or using Do Not Disturb, use

Barge-In to reach that person in an emergency or if you have
special instructions to interrupt. When the extension is busy

you hear a tone and Barge-In connects you to the call; if your

co-worker is using Do Not Disturb, his or her telephone rings.

NOTE:

For information on Do Not Disturb, see the MLX-10D,
MLX-28D, and MLX-20L Display Telephones User’s

Guide.

You cannot use Barge-In on the following:

■

A conference call, if the conference already has the

maximum number of participants

■

Telephones that have forwarded calls by using

Coverage, Forward, or Follow Me. (You hear ringing at
the extension you are calling.)

■

Telephones that have Privacy in use. (You hear a fast

busy signal.)

■

Telephones that are being programmed. (You hear

ringing.)

■

Telephones which are in the process of dialing. (You

hear a fast busy signal.)

4-16

Barge-In

Содержание Merlin Legend MLX-20L

























































































































































Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы:

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 84 / 152

Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы: