AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 61

Страница: 61 / 152

Quick Start

Transferring a Call

You can transfer a call from your extension to another inside

extension or outside number. The following procedure
provides the basic steps for transferring a call. To use one-

touch transfer and other system features available during
transfer, see “Transfer” in Chapter 4.

To Transfer to an Inside Extension

1. If your phone has Auto Dial buttons, check the light

next to the button for the person’s extension.

■

If the light is on, the person is unavailable.

Consider using Camp-On, Paging, or Park and Paging. See
Chapter 4 for more information on these features.

■

If the light is off, go to Step 2.

2. Press Transfer.

The call is put on hold automatically and the system selects an SA or

ICOM button.

3. Press the Auto Dial button or dial the person’s

extension.

■

If the person is available, announce the call and

hang up.

The call is transferred.

■

If the person is unavailable, return to the caller

by pressing the SA or line button with the held
call.

Transferring a Call

2-11

Содержание Merlin Legend MLX-20L

























































































































































Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы:

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 61 / 152

Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы: