AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 56

Страница: 56 / 152

Quick Start

Making a Call

When you lift the handset, you are connected to a free line
automatically. To use a line other than the one with the red
light, press the button before or after lifting the handset.

To Make an Inside Ringing Call

1. If the red light next to the line or SA button to be used

for the call is not on, press the button.

2. Lift the handset, press Speaker, or use the headset.
3. Press a DSS or Auto Dial button for the extension, or

dial the extension number.

Your co- worker’s phone rings.

To Make an Inside Voice-Announced

Call

1. Press ICOM Voice or SA Voice.

2. Lift the handset, press Speaker, or use the headset.
3. Press a DSS or Auto Dial button for the extension, or

dial the extension number.

Call beeps on that person’s phone.

4. When you hear a beep, begin talking.

If you hear ringing or busy tone, the person is

unavailable; hang up.

2-6

Making a Call

Содержание Merlin Legend MLX-20L

























































































































































Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы:

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 56 / 152

Результаты поиска

Содержание Merlin Legend MLX-20L

Отзывы: