manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 116 / 152

Поделиться
Скачать
AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 116

Features

Reminder Service

Y

OU 

can use Reminder Service to place calls automatically to

telephones in the system at preset times—for example, to

remind co-workers of meetings or appointments, or to provide
guests in hotels with wake up calls.

Your co-workers can set and cancel their own reminders or
you can set and cancel reminders for them. You can set a

reminder to ring several telephones at the same time.

When you set a reminder, a call is placed to the phone at the

preset time. If the call is not answered within 30 seconds, the
phone stops ringing and the reminder is identified as a
missed reminder. Missed reminders also result when the
extension is busy. A set reminder will ring at the same time
every day until you cancel it. Your system can be set to

cancel all reminders automatically at a certain time each day.

You can program line buttons as Reminder Set  and

-

Reminder Cancel  or use feature codes to set and cancel
reminders.

NOTE:

You must have a DSS adjunct or inside Auto Dial buttons

programmed to use this feature.

You can also program a Missed Reminder  button. When a

reminder call is missed, the green light next to Missed
Reminder  flashes. Pressing this button displays a message
that tells you the time, the name, and the extension of the
missed reminder.

4-48

Reminder Service

Содержание Merlin Legend MLX-20L

























































































































































Отзывы:

Нет отзывов