manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 113 / 152

Поделиться
Скачать
AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 113

Features

Park

When transferring a call, you may find that your co-worker
cannot be located. Use Park to hold the’ call and use Paging
to announce the call over your co-worker’s speakerphone or
over the building’s loudspeaker system. (For more
information, see Paging earlier in this chapter. )

When you park a call, you put it on hold so it can be
answered from any phone in the system. Calls can be parked
at your extension or at a specific Park Zone. (You cannot
park a call at a Park Zone where another call is parked.)

A co-worker can pick up the call from the nearest phone by

using Pickup and dialing the extension, line, or Park Zone you
announced. If the call is not picked up after a set time, it
returns to your console.

Park can be used with a programmed Park or Park Zone
button.

NOTE:

Park Zone extensions and Paging must be programmed

for your system.

You must have Park Zone extensions, Speakerphone

Paging group numbers and/or Loudspeaker Paging

access code numbers. See your system manager.

Park

4-45

Содержание Merlin Legend MLX-20L

























































































































































Отзывы:

Нет отзывов