manualshive.com logo in svg

AT&T Merlin Legend MLX-20L, Руководство оператора, Страница: 103 / 152

Поделиться
Скачать
AT&T Merlin Legend MLX-20L Скачать руководство пользователя страница 103

Features

To Use Send/Remove Message without

a DSS or Auto Dial

1. Press  Send/Remove Message,  or press  Feature  and

dial 

38.

2. Dial the person’s extension.

NOTE:

You cannot check the status of co-workers’
message lights without DSS or Auto Dial buttons. If
you send a message, you may be turning off the
message light that was turned on by another
operator.

Posted Message

Use Posted Message to let co-workers with display

telephones know when you are unavailable. When a co-
worker dials your extension, the Posted Message you have

chosen appears on his or her display. You do not need a
display console to post messages.

Co-workers can also post messages from their telephones.
When you dial their extensions, the message shows on your
display. It also shows when you inspect their DSS button.

Messaging

4-35

Содержание Merlin Legend MLX-20L

























































































































































Отзывы:

Нет отзывов