manualshive.com logo in svg

AT&T Merlin Legend BIS22, Руководство для руководителей

Поделиться
Скачать
AT&T Merlin Legend BIS22 Скачать руководство пользователя страница 36

About Your Calling Group Supervisor
Telephones 

Programming a Telephone

The supervisor and agent telephones may or may not have

been programmed with calling group buttons when the

system was installed. Use the following procedures to

program the telephones, if necessary.

For a DSS, you do not need to program Agent buttons. The
DSS is set up with all the extensions in the system, including

the calling group agents' extensions.  Also, the buttons may

be already labeled with the agents' names, extension
numbers, or another identifier chosen by your system

manager. Check with your system manager if you're not sure
which extensions are included in your calling groups.

To Program an Agent Button on

Supervisor MLX Display Telephones

1.

2.
3.

4.

5.

6.

Label the button with the agent’s name or extension.
Press Menu.
Select 

Ext Program [Prog]. 

If this feature is not displayed, press More.

Select 

Start.

Press the button labeled with the agent’s name or
extension.
Select 

ListFeature [List].

2-20          

Programming a Telephone

Содержание Merlin Legend BIS22



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды