AT&T MERLIN II Attendant, Руководство по установке

Страница: 37 / 53

8
9
1 0
1 1
When the business is closed, the Night Primary
Extension is the first number that the MERLIN II
Attendant dials when a caller selects this route after
normal business hours.
Dial #to indicate the end of the command for the
Night Primary Extension.
Dial the Night Secondary Extension.
NOTE:
If this space is blank on the form, skip to step
10. If a secondary extension is not
programmed, callers hear the Transfer Fail
announcement when the first extension is
busy or does not answer.
When the business is closed, the Night Secondary
Extension is the number that the MERLIN II Attendant
dials when it cannot connect the caller to the Night
Primary Extension.
Dial #to indicate the end of the command for the
Night Secondary Extension.
The two-beep confirmation tone sounds.
Repeat these steps for each Supervised Transfer route.
NOTE:
When programming route 0 for the receptionist,
use an extension number that is not in the dial
plan, such as 720, so that calls to the receptionist
are directed to a line button not to an intercom
button.
Programming Blind
Refer to MERLIN II Attendant Form G and follow these
Transfers
steps to enter blind transfer routes:
N O T E :
If you make a mistake and want to reprogram a
particular route, enter *3 followed by the route
number (O through 9) and dial # four times. This
erases all programmed extensions for the route
entered.
2-16 Programming Features