Connecting the Voice Terminals
There are several types of voice terminals available. Some are more practical
for employees with limited need for custom features and access to multiple out-
side lines. Others are designed for employees who need access to many
custom features or outside lines. A 34-button deluxe voice terminal, with lights
by every flat button, is most appropriate for an attendant or receptionist.
PREPARE THE VOICE TERMINALS
Each voice terminal has the following components, which come boxed together:
Voice terminal body
Handset
Coiled handset cord
Modular voice terminal cord
Desk stand and/or wall mount
Prepare the voice terminal as follows:
Voice terminal
LINE
3
Handset
●
●
●
●
●
2
2
Modular voice
terminal cord
1
2
3
4
5
Assemble each voice terminal and attach the desk stand or wall mount
following the instructions that come with the components.
Plug one end of the coiled handset cord into the handset, and the other
end into the jack next to the handset symbol at the base of the voice
terminal body.
Plug the modular voice terminal cord into the jack labeled Line on the
bottom of the voice terminal.
NOTE:
(If the other end of this modular voice terminal cord is already
plugged into the control unit (as may be the case for a voice terminal
located very close to the control unit), a red light will probably go on next
to a button when you plug the cord into the Line jack on the voice ter-
minal, and the voice terminal may even begin to ring. Don’t worry. The
red light should go on, and step 5 tells you how to stop the ringing.
Find the volume control on the left side of the voice terminal, and slide
it to the center position.
Find the Test/Program (T/P) switch, also on the left side of the voice ter-
minal, and make sure it’s set to the center position. If the switch is set
at T or P, the voice terminal will begin ringing as soon as you plug it in.
Coiled
handset cord
Volume control
Test/Program switch
HI
LO
4
5
21