manualshive.com logo in svg

AT&T Merlin 1030, Руководство администратора

Поделиться
Скачать
AT&T Merlin 1030 Скачать руководство пользователя страница 98

Activating and Deactivating Enhanced Night Service at the Attendant Console
To activate or deactivate Night Service manually, put the administrator/attendant con-
sole in the attendant mode, following the boxed instructions for leaving administra-
tion mode given on page 28, then perform one of these operations:

•  To activate Night Service without Outward Restriction, touch  Night Service.

The green light next to the button goes on.

•   To deactivate Night Service without Outward Restriction, touch  Night Service.

The green light next to the button goes off.

•  To activate Night Service with Outward Restriction,

a.  Touch Night Service.

The green light next to the button flashes.

b.   Dial the password.

The green light becomes steady

If you don’t enter the password within one minute or if you make a mistake

dialing the password, the green light goes out and Night Service remains
off. If this happens, just perform both steps again.

•  To deactivate  Night Service  with Outward Restriction,

a.  Touch Night Service.

The green light next to the button flashes.

b.  Dial the password.

The green light goes off.

If you don’t enter the password within one minute or if you make a mistake

dialing the password, the green light becomes steady and Night Service

remains on. If this happens, just perform both steps again.

95

Содержание Merlin 1030
































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды