manualshive.com logo in svg

AT&T Merlin 1030, Руководство администратора

Поделиться
Скачать
AT&T Merlin 1030 Скачать руководство пользователя страница 92

Administering Night Service With Extra Alert

If your system includes the optional Services Module, you can associate extra-alerting

devices such as bells and flashing lights with specific lines or line pools. Then, when

Night Service is activated, the device rings or flashes whenever a call comes in on
one of the designated lines.

For example, the Shipping Department at Primo Foods has an extra-alerting device,
a bell, mounted above the entrance to the warehouse area. When Frank administered
Prime’s Enhanced Night Service, he assigned the individual line and the local line
pool that appear on the Shipping Department’s voice terminals to activate the device.
Whenever Night Service is in effect, any call that comes in on the individual line or
on any of the lines in the local line pool causes the bell to ring.

Follow the procedure below to assign up to three extra-alerting devices to lines or
line pools. Remember that you can assign only one extra-alerting device to a par-

ticular line or line pool.

1. If you have not already done so, enter administration mode by foloowing the

instructions on page 28.

2. Touch Adm Misc.

The lights next to the administration mode buttons stop flashing and the green

light next to Adm Misc becomes steady.

3. Dial the 4-character code #307.

4. One by one, touch the button for each line that you want to activate an extra-

alerting device until the green light next to the line button shows the

appropriate code.  Each successive touch gives you one of the following code:

Steady green light on = line activates alerting device 1

Slowly flashing green light = line activates alerting device 2

Rapidly flashing green light = line activates alerting device 3

Green light off = line does not activate and alerting device

5. Touch  Adm Misc.

The lights next to the administration mode buttons flash again.

6. Continue to administer your system, or leave administration mode by following

the boxed instructions on page 28.

89

Содержание Merlin 1030
































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды