manualshive.com logo in svg

AT&T Merlin 1030, Руководство администратора

Поделиться
Скачать
AT&T Merlin 1030 Скачать руководство пользователя страница 120

Feature Programming Chart

Use the chart below as a quick reference when you want to program features onto your voice terminal.

Feature Name

(Suggested Button Label)

Description

Programming Code

Notes

QUICK DIALING FEATURES

Outside Auto Dial

Dial outside telephone

• Dial 

✱ 

90.

numbers or PBX/Centrex

• Dial an outside number,

Name or

feature codes with one

an account number, or a

Location

touch.

PBX,

Centrex, or

Custom Calling feature
code.

Auto Intercom

Place ringing intercom

• Dial 

✱ 

91.

A button with lights is recom-

Name or

calls with one touch.

• Dial a MERLIN system

mended but not required. The

intercom number.

green light goes on when the other
person is using his or her voice ter-
minal or is using the Do Not Disturb

Location

feature. You can use an Auto inter-
com button whenever instructions
call for dialing an intercom number.
You cannot program both Auto in-
tercom and Manual Signaling for
the same voice terminal.

Manual Signaling

Generate a beep at

• Dial 

✱ 

6.

Use Manual Signaling to contact

Signal Name

another person’s voice

• Dial

the intercom

someone with a prearranged

terminal.

number for the person

signal. If you program this feature

you want to signal.

on a button with lights, the green
light goes on when the other person
is using his or her voice terminal or
is using the Do Not Disturb feature.
You cannot program Manual
Signaling and Auto Intercom for the
same voice terminal.

Personal Speed Dial

Assign a 3-character code

• Dial a Personal Speed

For 5-and 10-button voice terminals

(uses a dial code in-

(#01 through #22) to each

Dial code (#01 through

only.

stead of a button)

telephone number you call

#22).

frequently.

• Dial 

✱ 

90.

• Dial an outside tele-

phone number, a PBX,
Centrex, or Custom
Calling feature code, or
an account number.

System Speed Dial

If you programmed

• Dial 

✱ 

95.

You assign System Speed Dial

System Speed Dial codes

• Dial a System Speed

codes to frequently called

Name of

for frequently dialed

Dial code (#60 through

numbers; then everyone connected

Location

numbers, you can assign

#99).

to your MERLIN system can use

any of them to buttons for

those codes for abbreviated dialing,

one-touch dialing.

It is not necessary to assign these

codes to buttons.

Saved Number Redial

Save a number indefinitely

• Dial 

✱ 

74.

If you have a 5- or 10-button voice

for later redialing.

terminal, you can dial a code to use

Save Number

this feature instead of using a

button

Last Number Redial

Redial the number you

• Dial 

✱ 

73.

If you have a 5- or 10-button voice

dialed most recently.

terminal, you can dial a code to use

Last Number

this feature instead of using a

button.

117

Содержание Merlin 1030
































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды