
Add and register handsets
Before using a new
DL70010/DL70020
handset, make sure it is
registered with an AT&T
DL72210/DL72310/DL72340/DL72350
telephone system (purchased separately). These telephone
systems can support up to five handsets.
The handset(s) provided with your telephone system are already
registered as
HANDSET 1
, and so forth. Additional handsets are
assigned numbers in the sequential order they are registered (up
to
HANDSET 5
). Each handset must be registered to the telephone
base before use.
Register a handset to your telephone base
1. Before you begin registration, make sure the handset is out of the
telephone base or charger and shows
To register HS...
and
...see
manual
alternately.
2.
Put the handset you wish to register on the telephone base cradle.
Registration and deregistration
13
3. The handset shows
Registering...
. If the registration is
successful, the handset beeps and its screen displays
Registered
. The handset is now registered with the telephone
base.
For registration, put the handset on the
telephone base, not the handset charger.