AT&T CD4930, Руководство пользователя

Страница: 39 / 67

Use the answering system menu of the telephone to set up the
announcement message, message alert, activate call screening, or change the
number of rings, remote access code or priority code.
When the telephone is in idle mode, press
MENU/
SELECT
to enter the main menu.
Press
MENU
/SELECT
again to select
Answering sys
.
Announcement
Your outgoing announcement plays when calls are answered by the
answering system.
The telephone has a default outgoing announcement,
“Hello. Please leave a
message after the tone.” You can use this announcement, or record your own.
You can record an announcement of up to three minutes. The system does
not record any announcement shorter than two seconds.
To play your current outgoing announcement:
When the telephone is in idle mode, press
MENU/
SELECT
to enter the main menu.
Press
MENU
/SELECT again to select Answering sys .
Press
MENU
/SELECT
again to select
Announcement
.
Press
CALL LOG
q
or
DIRECTORY
p
to scroll to
Play current , then press
MENU
/SELECT .
To record a new outgoing announcement:
When the telephone is in idle mode, press
MENU/
SELECT
to enter the main menu.
Press
MENU
/SELECT twice to select Announcement .
Press
MENU
/SELECT again to select Record new .
The system announces, “Record after the tone. Press 5
when you are done.”
Speak towards the telephone to record your
announcement. Press 5 to end recording. Your
recorded announcement plays.
To listen to the recorded announcement again, scroll to
Play current
and
press
MENU
/SELECT
.
1.
2.
1.
2.
3.
4.
1.
2.
3.
4.
Answering system settings
Answering system
>Answering sys
Directory
q
>Announcement
Delete all old
q
Record new
>Play current
p
q
>Record new
Play current
q