AT&T administration and, Руководство по установке и обслуживанию

Страница: 222 / 404

If
you have a MERLIN II System Display Console with
more than 40 stations in the system, some labels will have
two entries. Write the lower intercom number on the top
half of the button label and the higher intercom number on
the bottom half. Likewise, on a BIS-34D console, leave
room below “Intercom-Voice” and "Intercom-Ring" since
these buttons have another function for administration as
d e s c r i b e d b e l o w .
Administration Mode The MERLIN II System Display Console has an overlay
Overlay that is placed on the console during system administration.
lf you have a BIS-34D Console, a separate overlay is not
used during administration. However, because the bottom
two buttons in the leftmost column take on special
functions in administration mode, you should place a
second entry on the labels for those buttons. Under
“Intercom-Ring,” write or type, “Adm Tel.” Under
“Intercom-Voice,” write or type, “Adm Pool.” You may
want to record the administration function labels in a
different color than the call-handling function labels.
NOTE:
Although the Message and Conference buttons
take on different functions during administration,
those functions are not labeled on the buttons.
LABELS FOR For attendant consoles other than at Station 10 and for all
ATTENDANT the voice terminals and basic telephones in the system
CONSOLES AND
refer to the completed Station Configuration Forms. Copy
VOICE TERMINALS the information from the forms onto the appropriate labels.
NOTE:
If you label buttons with the names of
programmable features, be sure to assign the
features from the attendant console using
Centralized Programming, or notify the users that
they should program those features themselves.
3-14 Before Administering a System