20
5.2.3.
Restart of the modem
This command is intended for the remote restart of the modem, for example in the event of the
problem with GPRS connection. The complete restart of the modem takes about 2 minutes.
The command
restart
The command for restart of the modem.
The response message
The demand for application restart was
accepted
Information about acceptance of
demand for restart of the modem.
5.2.4.
Information about the GPRS connection settings
If the SMS message
gprs
without any parameters is sent, the modem will send back the SMS
message with information about the current GPRS connection settings.
The command
gprs
The command for reading of information about the GPRS connection
settings.
An example of the response message
APN='internet' User='' Password='' DNS=''
Information about the GPRS
connection settings.
5.2.5.
Setting of the GPRS connection
The first word of the message must always be
gprs
. After this keyword, parameter values for an
actual setting follows in specific order:
gprs [
apn
] [
user
] [
password
] [
dns
]
If the trailing parameter values are not entered, they will be deleted. Don’t enter the square
brackets in the SMS message. Individual items of the message must be separated by spaces. The
meaning of the parameters is following:
apn
the access point name
user
the user name for login
password
the password for login
dns
the DNS server name or IP address
If any of the parameters
user
,
password
or
dns
are not entered „from the back“, they will be
always deleted.
If the modem accepts the command, the SMS message will be sent back. And if the modem was
logged on the M2MTalk server, the modem will be restarted automatically.
