Solid Conrete Wall Installation
6
2.5"
(64mm)
Concrete Wall
Anchor
Min.
8"(203mm)
3/8"
(10mm)
3/8"
(10mm)
DANGER
CAUTION
:
To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the wall plate
assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on
to the next step.
No!
WATER LINE
ELECTRIC LINE
Use a pencil to mark the
mounting holes on the wall.
Use a 3/8” (10mm) drill bit to
pre-drill holes at least 2.5” inches
(64mm) deep at the marked locations.
Insert a Wall Anchor into each
pre-drilled hole and lightly tap it with
a hammer until the Wall Anchor is flush
with the wall.
Use the Lag bolts (1) and
Washers (2) to secure the Wall Plate
to the wall. Make sure the Wall Plate is
level.
