Atag ZX6011K, Инструкция по эксплуатации

Страница: 54 / 70

GB 58
Your multi-function pyrolytic oven
recommendations
Please read these instructions before installing and using your oven.
The oven has been designed for domestic use only for cooking food. No
asbestos has been used in its construction.
USING FOR THE FIRST TIME:
Before you use your oven for the first time, leave it empty and, with the door
closed, turn it on to maximum temperature and let it heat up for 15 minutes.
This "runs the oven in". During this time there may be some smell from the
mineral wool that insulates the oven and there could be some smoke. This is
perfectly normal.
NORMAL USE:
- Always close the door properly. The oven is fitted with a seal designed to work
with a closed door.
- Never lean or let anyone sit on the oven door when it is open.
- The oven parts and accessories can become hot when the door is left partial-
ly open and the grill on. Always keep children at a safe distance.
- When the oven is on it will get hot. Take care not to touch the heating
elements inside the oven.
- Always protect your hands with oven gloves or something similar when remo-
ving food, accessories or containers from the oven.
- Do not line your oven with kitchen foil. The metal will increase the heat pro-
duced and could ruin the food and damage the enamel.
- Before carrying out the pyro-cleaning of your oven, be sure to remove all oven
accessories and wipe away major spillage.
- Do not use a steam or high-pressure cleaner.
- During the cleaning cycle accessible surfaces become much hotter than
during normal cooking. Keep children at a distance.
- Always check that the oven is off before you clean the inside.
- For your safety your oven is equipped with an AUTOMATIC STOP should you
inadvertently forget to turn off your oven. Afte
10 hours' operation, the AS
(Automatic Stop) function is activated and your oven stops heating. AS is
displayed in place of the time and a series of 2 successive pips is sounded for
a certain time.
Please note: it is very important to reset the function selector to zero in order
to re-use your oven.