Atag KD63122B, Инструкция по эксплуатации

Страница: 50 / 56

400011568334
Policies, standard documentation and additional product information can be found by:
• Visiting our website www.atag.nl, www.atag.be
• Contacting our After-sales Service (See phone number in the warranty booklet).
When contacting our After-sales Service, please state the codes provided on your product's identification plate.
The model information can be retrieved using the QR-Code indicated on the energy label.
The label also includes the model identifier that can be used to consult the https://eprel.ec.europa.eu database portal.
* Available only on certain models
Note: If the chiller declaration is present in the rating plate (see image below), the declaration applies only to standard EN 62552:2013 valid until February
28th, 2021.
What to do if... Possible reasons Solutions
One or more green symbols
are flashing continuously
and it is not possible to
change the temperature set.
Malfunction alarm.
The alarm indicates a fault in a technical
component.
Contact Technical Assistance Service.
The temperature of the
refrigerator compartment is
too cold.
• The set temperature is too cold.
• A large amount of fresh food may
have been placed in the freezer
compartment.
• Try to set a less cold temperature.
• If fresh food has been placed in the freezer compartment, wait
until it has fully frozen.
• Turn off the fan (if present) following the procedure described in
the paragraph “FAN”.