Filter indication
Saturation of grease filter and recirculation filter
If only the filter indicator is flashing, the grease filters need to be cleaned. If both the filter indicator
and the letter ‘r’ flash in the display, replace the recirculation filter.
Grease filter
After 10, 20, or 40 hours of operation, the grease filter indicator lights up (depending on the intensity
of use).
•
The grease filters should then be cleaned.
•
Reset the filter indicator by touching the filter indicator key for 2 seconds.
Recirculation filter (if in recirculation mode)
After 300 operating hours (recirculation filter), the filter indicator and the letter ‘r’ flash on the display.
•
Replace the recirculation filter.
•
Reset the filter indicator by touching the filter indicator key for 2 seconds.
Replacing recirculation filter (when using the recirculation box)
The recirculation box with a filter is located under the bottom of the
cabinet and is accessible from the kitchen cabinet.
1. Open or remove the bottom drawer of the kitchen cabinet.
2. Remove the cover of the recirculation box.
3. Remove the filter.
4. Fit a new filter with the arrow (see on the side of the filter) pointing
upwards.
5. Fit the cover of the recirculation box, and close the drawer or put
it back in place.
6. Reset the filter indicator by touching the filter indicator key for 2
seconds.
TIP!
Consult the website for additional maintenance and cleaning instructions!
52
Maintenance
