ASYS Totech EU SUPER DRY U-5003 I-3315003 Скачать руководство пользователя

Страница: 19 / 21

Operation Manual Touchscreen

15.5 Guidelines for the RMA procedure of Totech Europe B.V.

Please provide us as much as possible details to speed up the process.

✓

Navigate to our service portal at

http://service.superdry-totech.com/

✓

Totech Europe B.V. will only accept tickets filed in our service portal.

✓

We will provide you the warranty and/or repair parts as soon as possible.

Shipping the parts to Totech Europe B.V.

✓

Each part must have its own RMA form attached.

✓

All parts must be shipped back in original packaging as much as possible, and ESD safe.

✓

Those parts that are returned to Totech EU without any proper packaging will not be accepted

for warranty or repair.

✓

Broken or damaged parts due to shipping, or bad packaging, will not be accepted for

warranty.

Send all parts to:

Totech Europe B.V.

To: Technical support department

Paxtonstraat 11

8013 RP Zwolle

The Netherlands

Содержание Totech EU SUPER DRY U-5003 I-3315003






















Результаты поиска

Содержание Totech EU SUPER DRY U-5003 I-3315003

Отзывы:

Похожие инструкции для Totech EU SUPER DRY U-5003 I-3315003

Бренды по названию

Популярные бренды

ASYS Totech EU SUPER DRY U-5003 I-3315003, Руководство по эксплуатации

Результаты поиска

Содержание Totech EU SUPER DRY U-5003 I-3315003

Отзывы:

Похожие инструкции для Totech EU SUPER DRY U-5003 I-3315003

Бренды по названию

Популярные бренды