ASYS Totech EU SUPER DRY U-5003 I-3315003 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 21

ASYS Totech EU SUPER DRY U-5003 I-3315003 Скачать руководство пользователя страница 11

Operation Manual Touchscreen

6.4 SETTINGS 4/4

MANUAL REGENERATION AND REGENERATION TIMER

Continue to the fourth setting page by pressing [Next]. This page contains the regenerations timer.

Here you can define up to three times, in which a regeneration is to be started. Dynamic regeneration

remains active so that additional generations are performed automatically. If this is not desired, the

dynamic regeneration on the service menu has to be deactivated.

With Manual Regeneration, the user can start an immediate regeneration.

This function is only available during the drying phase. The [man.Reg] button initiates a regeneration.

The necessary strength of the regeneration is determined automatically.

7. LANGUAGE

In the menu you will find the Language option. Here you have the possibility to choose your country

language. The following languages are available:

German - English

Other languages are available upon request.

«
...
9
10
11
12
13
...
»

Содержание Totech EU SUPER DRY U-5003 I-3315003






















Отзывы:

Нет отзывов