75
TROUBLESHOOTING
issue
Possible cause
solution
no display
fault in the electric circuit
Check if the power connection is
guaranteed.
computer without function
Replace the computer
No speed display
Der Computer erhält kein Signal
vom Geschwindigkeitssensor
Refer to the installation instruc-
tions and check all cable con-
nections
Consult the service department
Sensor is faulty
Computer is faulty
No hand pulse signal or wrong
hand pulse signal
The computer does not receive
a pulse signal.
Prüfen Sie die Handpulssensor-
leitungsstecker zum Computer
The computer receives a weak
or periodically occurring pulse
signal.
The hand pulse sensors or pul-
se receivers will not work if your
skin is extremely dry. Moisten
your hands with a little water
and try again.
Clean the hand pulse sensors or
pulse receivers to ensure good
contact between your body and
the pulse sensors.
The handbar moves / shaking
Screws have come loose
Check all screws for tightness.
Noise generated by moving
parts
Incorrect assembly
Remove the covering and ensu-
re the correct assembly of the
moving parts.
No resistance adjustment possi-
ble / no resistance noticeable
magnetic series
Remove the cover and check
the magnetic series.
mechanism damaged
Remove the cover and check
The belt has comeoff
Remove the cover and check
In case of malfunctions, please remove the batteries and the AC adapter for a few seconds.
If the fault persists, please contact our service department.
If you have any questions about your fitness equipment, our employees at the
Service department will be happy to continue.
