Asus Z97-WS Скачать руководство пользователя страница 139

Страница: 139 / 186

Z97-WS

4-1

Chapter 4

Software support

4.1

Installing an operating system

•

This motherboard supports 32-bit/64-bit Windows

7, 32-bit/64-bit Windows

8, and

32-bit/64-bit Windows

8.1 operating systems (OS).

•

Motherboard settings and hardware options vary. The setup procedures presented

in this chapter are for reference only. Refer to Windows

operating system

documentation for detailed information.

Chapter 4: Software support

4.2

Support DVD information

The contents of the support DVD are subject to change at any time without notice. Visit the

ASUS website at www.asus.com for updates.

4.2.1

Running the support DVD

Ensure that you have an Administrator account before running the support DVD in

Windows

7, Windows

8, or Windows

8.1 operating systems.

To run the support DVD:

Place the Support DVD into the optical drive.

In the

AutoPlay

dialog box, click or tap

Run ASSETUP.EXE

If the

AutoPlay

dialog box does not appear, browse the contents of the support DVD and

double-click or tap

\\bin\ASSETUP.EXE

to launch the

ASUS motherboard support DVD

main menu.

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Asus Z97-WS, Руководство пользователя, Страница: 139 / 186

Результаты поиска

Содержание Z97-WS

Отзывы: