Asus Z97-WS Скачать руководство пользователя страница 133

Страница: 133 / 186

Z97-WS

3-61

Chapter 3

3.11.2 ASUS EZ Flash 2

ASUS EZ Flash 2 allows you to update the BIOS without having to use a bootable floppy disk

or an OS-based utility.

Before you start using this utility, download the latest BIOS from the ASUS website

at www.asus.com.

To update the BIOS using EZ Flash 2:

Insert the USB flash disk that contains the latest BIOS file to the USB port.

Enter the Advanced Mode of the BIOS setup program. Go to the Tool menu to select

ASUS EZ Flash Utility and press <Enter> to enable it.

Press <Tab> to switch to the Drive field.

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS,

and then press <Enter>.

Press <Tab> to switch to the Folder Info field.

Press the Up/Down arrow keys to find the BIOS file, and then press <Enter> to perform

the BIOS update process. Reboot the system when the update process is done.

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Asus Z97-WS, Руководство пользователя, Страница: 133 / 186

Результаты поиска

Содержание Z97-WS

Отзывы: