Asus Z97-WS Скачать руководство пользователя страница 122

Страница: 122 / 186

3-50

Chapter 3: BIOS setup

Chapter 3

3.8

Boot menu

The Boot menu items allow you to change the system boot options.

Boot Configuration

Fast Boot [Enabled]

[Disabled]

This item allows your system to go back to its normal boot speed.

[Enabled]

This item allows your system to accelerate the boot speed.

The following items appear only when you set the Fast Boot to

[Enabled]

SATA Support [All Devices]

[All Devices]

All devices connected to SATA ports are available during POST.

This process extends the POST time.

[Hard Drive Only] Only hard drives connected to SATA ports are detected during

POST.

[Boot Drive Only]

Only boot drives connected to a SATA ports are detected during

POST.

USB Support [Partial Initialization]

[Disabled]

All USB devices will not be available until OS boot up for a

fastest POST time.

[Full Initialization] All USB devices will be available during POST. This process will

extend the POST time.

[Partial

Initialization]

For a faster POST time, only USB ports with keyboard and

mouse connections will be detected.

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Asus Z97-WS, Руководство пользователя, Страница: 122 / 186

Результаты поиска

Содержание Z97-WS

Отзывы: