Asus Z97-WS Скачать руководство пользователя страница 112

Страница: 112 / 186

3-40

Chapter 3: BIOS setup

Chapter 3

Intel xHCI Mode [Smart Auto]

[Auto]

The xHCI is automatically enabled and runs at USB 3.0 mode when the

xHCI driver is installed in the operating system.

[Smart Auto]

Upon detection, the xHCI driver supports the USB 3.0 mode during both

POST and operating system.

[Enabled]

Enables the xHCI controller.

[Disabled]

Disables the xHCI controller.

EHCI Hand-off [Disabled]

[Enabled]

Enables the support for operating systems without an EHCI hand-off

feature.

[Disabled]

Disables the EHCI Hand-off support.

Mass Storage Devices [Auto]

This item allows your system to detect the devices according to their media formats.
Configuration options: [Auto] [Floppy] [Forced FDD] [Hard Disk] [CD-ROM]

USB Single Port Control

This item allows you to enable or disable the individual USB ports.

Refer to section

1.2.2 Motherboard layout

for the location of the USB ports.

3.6.6

Platform Misc Configuration

The items in this menu allow you to configure the platform-related features.

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Asus Z97-WS, Руководство пользователя, Страница: 112 / 186

Результаты поиска

Содержание Z97-WS

Отзывы: