manualshive.com logo in svg

Asus Z97-WS, Руководство пользователя, Страница: 111 / 186

Поделиться
Скачать
Asus Z97-WS Скачать руководство пользователя страница 111

Z97-WS

3-39

Chapter 3

NB PCIe Configuration

This item allows you to configure the NB PCI Express settings.

PCIEx16_1/4 Link Speed [Auto]

This item allows you to configure the PCIEx16 speed for slots 1~4.
Configuration options: [Auto] [Gen1] [Gen2] [Gen3]

Memory Configuration

This item allows you to configure the memory configuration parameters.

Memory Scrambler [Enabled]

Set this item to 

[Enabled]

 to support high frequency DRAMs for a better stability.

Configuration options: [Enabled] [Disabled]

Memory Remap [Enabled]

Set this item to 

[Enabled]

 to support DRAM address remapping for 64-bit operating 

systems.
Configuration options: [Enabled] [Disabled]

3.6.5 

USB Configuration

The items in this menu allow you to change the USB-related features.

The 

Mass Storage Devices 

item shows the auto-detected values. If no USB device is 

detected, the item shows 

None

.

Legacy USB Support [Enabled]

[Enabled] 

Your system supports the USB devices in legacy operating systems.

[Disabled] 

Your USB devices can be used for BIOS setup only and cannot be 

recognized in the boot devices list.

[Auto] 

Your system automatically detects the presence of USB devices at startup. 

If any USB devices are detected, the legacy USB support is enabled.

Содержание Z97-WS



























































































































































































Отзывы:

Нет отзывов