Asus Z97-WS Скачать руководство пользователя страница 104

Страница: 104 / 186

3-32

Chapter 3: BIOS setup

Chapter 3

3.6.1

CPU Configuration

The items in this menu show the CPU-related information that the BIOS automatically

detects.

The items in this menu may vary based on the CPU installed.

Intel Adaptive Thermal Monitor [Enabled]

This item allows you to protect the CPU by decreasing its frequency as it reaches the thermal

throttle point. The thermal monitor includes TM1 (Thermal monitor 1), TM2 (Thermal monitor

2), and EMTTM (Enhanced Multi-threaded Thermal Monitoring). Configuration options:

[Disabled] [Enabled]

Hyper-threading [Enabled]

The Intel Hyper-Threading Technology allows a hyper-threading processor to appear as two

logical processors to the operating system, allowing the operating system to schedule two

threads or processes simultaneously.
[Enabled]

Two threads per activated core are enabled.

[Disabled]

Only one thread per activated core is enabled.

Active Processor Cores [All]

This item allows you to select the number of CPU cores to activate in each processor

package. Configuration options: [All] [1] [2] [3]

Limit CPUID Maximum [Disabled]

When set to

[Enabled]

, this item allows the legacy OS to boot even without support for CPUs

with extended CPUID functions. Configuration options: [Disabled] [Enabled]

Содержание Z97-WS



























































































































































































Результаты поиска

Содержание Z97-WS

Отзывы:

Asus Z97-WS, Руководство пользователя, Страница: 104 / 186

Результаты поиска

Содержание Z97-WS

Отзывы: