Asus Z7S WS - Motherboard - SSI CEB Скачать руководство пользователя страница 44

Страница: 44 / 156

2-22

Chapter 2: Hardware information

Universal PCIe x16_3 slot (white, @ x8)

PCI_1 slot

PCIe 2.0 x16_2 slot (red, @ x16)

PCIX_1 slot

PCIe 2.0 x16_1 slot (red, @ x16)

PCIe x1_1 MIO slot

2.5.7

PCI/PCI-X slots

The PCI/PCI-X slots support cards such as a LAN card, SCSI card, USB card, and

other cards that comply with PCI 2.3 and PCI-X 1.0 specifications. Refer to the

figure below for the location of the slots.

This motherboard supports the ASUS SASsaby cards (optional) for SAS Hard

disk drive support. For SASsaby M, install the card to the two PCIe 2.0 x16 slots

(red) or the universal PCIe x16 slot (white). For SASsaby 1064E, install the card

to the universal PCIe x16 slot (white) only.

Содержание Z7S WS - Motherboard - SSI CEB





























































































































































Результаты поиска

Содержание Z7S WS - Motherboard - SSI CEB

Отзывы:

Asus Z7S WS - Motherboard - SSI CEB, Руководство пользователя, Страница: 44 / 156

Результаты поиска

Содержание Z7S WS - Motherboard - SSI CEB

Отзывы: