ASUS ZenWiFi XD4S
AX1800 Dual Band WiFi Router
Model: XD4S
Quick
Start Guide
1
Plug the adapter into the DCIN port.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
XD4S Overview
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find three ZenWiFi XD4S, and power them on.
2
Use a network cable to connect your modem to the WAN port of one XD4S. This ZenWiFi XD4S will
be the AiMesh router, and the other two ZenWiFi XD4S will be the AiMesh nodes.
3
The LED turns solid blue to indicate that ZenWiFi XD4S is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh Setup Steps
Download free ASUS Router APP to set up and
manage your router(s).
Prepare
01
Place your AiMesh router and nodes in the same room and at
least 1 meter apart during the setup process.
AiMesh node
02
Keep your AiMesh nodes powered on and standby for AiMesh
system settings.
Launch ASUS Router APP, and then follow the on-screen
instructions to finish the AiMesh setup.
Launching ASUS Router APP
03
If your AiMesh router cannot find any AiMesh nodes nearby or synchronization
fails, please check the following and try again.
a
Move your AiMesh nodes closer to the AiMesh router ideally. Ensure that it is within 3 meters.
b
Your AiMesh nodes are powered on.
DC Power adapter
DC Output: +12V with max 1.5A current
Operating Temperature
0~40
o
C
Storage
0~70
o
C
Operating Humidity
50~90%
Storage
20~90%
Specifications:
LAN port
DCIN port
WAN/LAN port
At least
1 meter
At least
1 meter
WAN/LAN port
Connect your modem to this port
with a network cable.
LAN port
Connect your PC to a LAN port with
a network cable.
AiMesh node
AiMesh node
AiMesh router
AiMesh node
AiMesh node
AiMesh router
