Asus X99-M WS Скачать руководство пользователя страница 165

Страница: 165 / 176

ASUS X99-M WS

6-5

Chapter 6

6.2 NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology that

allows you to install multi-graphics processing units (GPU) graphics cards. Follow the

installation procedures in this section.

6.2.1 Requirements

• In SLI mode, you should have two identical SLI-ready graphics cards that are NVIDIA®

certified.

• Ensure that your graphics card driver supports the NVIDIA SLI technology. Download the

latest driver from the NVIDIA website at

www.nvidia.com.

•

Ensure that your power supply unit (PSU) can provide at least the minimum power

required by your system.

•

We recommend that you install additional chassis fans for better thermal environment.

•

Visit the NVIDIA zone website at http://www.nzone.com for the latest certified graphics

card and supported 3D application list.

6.2.2

Installing two SLI-ready graphics cards

The following pictures are for reference only. The graphics cards and the motherboard

layout may vary with models, but the installation steps remain the same.

To install two SLI-ready graphics cards:

1. Prepare two SLI-ready graphics cards.

Insert the two graphics card into the

PCIEX16 slots. If your motherboard

has more than two PCIEX16 slots,

refer to Chapter 1 in this user manual

for the locations of the PCIEX16 slots

recommended for multi-graphics card

installation.

Ensure that the cards are properly

seated on the slots.

Содержание X99-M WS

















































































































































































Результаты поиска

Содержание X99-M WS

Отзывы:

Похожие инструкции для X99-M WS

Бренды по названию

Популярные бренды

Asus X99-M WS, Руководство пользователя

Результаты поиска

Содержание X99-M WS

Отзывы:

Похожие инструкции для X99-M WS

Бренды по названию

Популярные бренды