4-18
Chapter 4: BIOS setup
Intel(R) SpeedStep(TM) Technology [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
TM
Technology. When set to
[Enabled], you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to [Disabled] if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
The following item appears only when you installed an Intel
®
Pentium
®
4 or later
CPU that supports the Enhanced Intel SpeedStep
®
Technology (EIST).
4.4.3.
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
South Bridge Configuration
Configure North Bridge
features.
North Bridge Configuration
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
North Bridge chipset Configuration
Memory Remap Feature
[Enabled]
Configure DRAM Timing by SPD
[Enabled]
Initiate Graphic Adapter
[PEG/PCI]
IGD Graphics Mode Select
[Enabled, 32MB]
Video Function Configuration
Memory.Remap.Feature.[Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
