4-16
Chapter 4: BIOS setup
Memory Voltage [Auto]
Allows you to set the Memory Voltage. Key in the value directly. Configuration
Configuration
options: [Auto] [Min = 1.85000V] [Max = 2.24375V]
NB Voltage [Auto]
Allows you to select the North Bridge voltage or set it to [Auto] mode.
Configuration options: [Auto] [1.30V] [1.35V] [1.40V] [1.45V]
VTT_CPU Over Voltage [Auto]
Manually set FSB Termination Voltage or set to Auto for safe mode.
Configuration options: [Auto] [1.2V] [1.3V]
SB Over Voltage [1.5V]
Manually set the Southbridge Chipset Voltage or set to Auto for safe mode.
Configuration options: [1.5V] [1.6V]
Setting a very high voltage may damage the component permanently, and
setting a very low voltage may cause the system to become unstable.
Auto.PSI.[Enabled]
Allows you to eanable or disable the Auto PSI mode.
Configuration options: [Disabled] [Enabled]
4.4.2
CPU Configuration
The items in this menu show the CPU-related information that the BIOS
automatically detects.
Configure advanced CPU settings
Manufacturer: Intel
Brand String: Intel(R)Core(TM)2 CPU 6300 @ 1.86GHz
Frequency : 1.86GHz
FSB Speed : 1066MHz
Cache L1 : 64 KB
Cache L2 : 2048 KB
Ratio Status: Unlocked (Min:06, Max:07)
Ratio Actual Value: 7
CPUID : 6F2
Ratio CMOS Setting
[Auto]
C1E Support
[Enabled]
Max CPUID Value Limit
[Disabled]
Vanderpool Technology
[Enabled]
CPU TM Function:
[Enabled]
Execute-Disable Bit Capability [Enabled]
Intel(R)SpeedStep(TM) Tech
[Enabled]
Sets the ratio between
CPU Core Clock and the
FSB Frequency.
NOTE: If an invalid
ratio is set in CMOS
then actual and
setpoint values may
differ.
