Asus V*-P5G45 Series страница 16 Скачать руководство пользователя

Страница: 16 / 120

1-6

Chapter 1: System introduction

• This motherboard comes with multiple VGA output that features desktop

extension on two monitors. You can connect two monitors to any two of the

onboard VGA, DVI-D, and HDMI ports. Note that DVI-D/HDMI dual output

works in OS environment only and that during POST or BIOS setup, only

DVI-D output is valid.

• DVI-D cannot be converted to output RGB Signal to CRT and is not

compatible with DVI-I.

• To play HD DVD or Blu-Ray Disc, make sure to use an HDCP compliant

monitor.

14.. HDMI.Out.port.

This port is for a high-definition multimedia interface (HDMI)

connector.

• This motherboard comes with multiple VGA output that features desktop

extension on two monitors. You can connect two monitors to any two of the

onboard VGA, DVI-D, and HDMI ports. Note that DVI-D/HDMI dual output

works in OS environment only and that during POST or BIOS setup, only

DVI-D output is valid.

• Due to the Intel

VGA driver issue, the Windows® Display Settings menu

may offer some resolution options that your monitor does not support.

When you set a resolution not supported by your monitor, it will black out. If

this happens, wait 15 seconds for the system to return to its original setting

or restart the system and press F8 to enter Safe Mode. In Safe Mode,

change the display setting to 800 x 600, and then restart the system to

adjust the monitor resolution from the Windows® Display Settings menu.

• Due to the Intel

driver issue, some monitor resolution settings will

lead to monitor overscan or underscan. Refer to the next page for the

troubleshooting on monitor overscan/underscan problem

• Playback of HD DVD and Blu-Ray Discs

The speed and bandwidth of the CPU/Memory, DVD player, and drivers will

affect the playback quality. Following is a configuration example for your

reference. Using the CPU/Memory of higher speed and bandwidth with the

higher-version DVD player and drivers will upgrade the playback quality.

CPU: Intel Core 2 Duo 2.4GHz

DIMM: DDR2-800 1GB

Playback software - CyberLink PowerDVD Ultra v8.0 1730.05

• To play HD DVD or Blu-Ray Disc, make sure to use an HDCP compliant

monitor.

• You can only play HD DVD or Blu-Ray Disc under Windows

Vista™ OS.

Содержание V*-P5G45 Series

























































































































Результаты поиска

Содержание V*-P5G45 Series

Отзывы:

Похожие инструкции для V*-P5G45 Series

Бренды по названию

Популярные бренды

Asus V*-P5G45 Series, Руководство по установке

Результаты поиска

Содержание V*-P5G45 Series

Отзывы:

Похожие инструкции для V*-P5G45 Series

Бренды по названию

Популярные бренды