Asus V*-P5G45 Series страница 110 Скачать руководство пользователя

Страница: 110 / 120

5-34

Chapter 5: BIOS setup

CPU Fan Profile [Standard]

Allows you to set the appropriate performance level of the ASUS Q-Fan.

When set to [Standard], the CPU fan automatically adjusts depending on

the CPU temperature. Set this item to [Silent] to minimize fan speed for

quiet CPU fan operation, or [Turbo] to achieve maximum CPU fan speed.

Configuration options: [Standard] [Silent] [Turbo]

Chassis.Fan.1.Speed.[xxxxRPM].or.[Ignored]./.[N/A]

The onboard hardware monitor automatically detects and displays the chassis

fan speed in rotations per minute (RPM). If the fan is not connected to the

motherboard, the field shows [N/A].

Chassis.Q-Fan.Control.[Disabled]

Allows you to enable or disable the Chassis Q-fan control feature.

Configuration options: [Disabled] [Enabled]

The following item appears only when you enable the

Chassis.Q-Fan.Control

item.

Chassis Fan Profile [Standard]

Allows you to set the appropriate performance level of the ASUS Q-Fan.

When set to [Standard], the chassis fan automatically adjusts depending

on the chassis temperature. Set this item to [Silent] to minimize fan speed

for quiet chassis fan operation, or [Turbo] to achieve maximum chassis fan

speed. Configuration options: [Standard] [Silent] [Turbo]

Power.Fan.Speed.[xxxxRPM].or.[Ignored]./.[N/A]

The onboard hardware monitor automatically detects and displays the power

fan speed in rotations per minute (RPM). If the fan is not connected to the

motherboard, the field shows [N/A].

CPU.Voltage��.3.3V.Voltage��.5V.Voltage��.12V.Voltage.

The onboard hardware monitor automatically detects the voltage output through

the onboard voltage regulators. Select [Ignored] if you do not want to detect this

item.

Содержание V*-P5G45 Series

























































































































Результаты поиска

Содержание V*-P5G45 Series

Отзывы:

Похожие инструкции для V*-P5G45 Series

Бренды по названию

Популярные бренды

Asus V*-P5G45 Series, Руководство по установке

Результаты поиска

Содержание V*-P5G45 Series

Отзывы:

Похожие инструкции для V*-P5G45 Series

Бренды по названию

Популярные бренды