manualshive.com logo in svg

Asus TS700-E8-PS4, Руководство пользователя, Страница: 21 / 210

Поделиться
Скачать
Asus TS700-E8-PS4 Скачать руководство пользователя страница 21

ASUS TS700-E8-PS4, TS700-E8-RS8

1-9

1.6 

Internal features

The barebone server includes the basic components as shown.

1. 

1200W 80PLUS Platinum Single Power Supply Module (TS700-E8-PS4) or

 

800W 80PLUS Gold 1+1 Redundant Power Supply Module (TS700-E8-RS8)

2. 

120mm x 38mm system fan

3. 

ASUS Z10PE-D16 WS Server Board

4. 

Chassis intrusion switch

5. 

Expansion card locks

6. 

Optical drive (optional)

7. 

2 x 5.25-inch drive bays

8. 

4-bay HDD module (First set with backplane; TS700-E8-PS4 only supports this set)

9. 

4-bay HDD module (Second set with backplane, TS700-E8-RS8 only)

10.  2 x 80mm x 38mm system fans (hidden beside the backplane)

11.  2 x 2.5-inch SSD bays (TS700-E8-RS8 only)

The barebone server does not include a floppy disk drive drive. Connect a USB floppy disk 

drive to any of the USB ports on the front or rear panel if you need to use a floppy disk.

*WARNING

HAZARDOUS MOVING PARTS 

KEEP FINGERS AND OTHER BODY PARTS AWAY

Turn off the system power and detach the power supply before removing or replacing any 

system component.

Содержание TS700-E8-PS4



















































































































































































































Отзывы:

Нет отзывов