Asus TS500-E5 Скачать руководство пользователя

Страница: 52 / 164

Chapter 3: Installation options

3-2

Removing the top cover

Unscrew and slide the top cover toward

the rear panel, and then lift it up from the

chassis.

3.1

Preparing the system for rack mounting

• The items required for the optional configurations described in this chapter

are not included in the standard barebone system package. These items

are purchased separately.

• We recommend that you allot at least 1U space above the server system to

ensure optimal thermal performance.

Removing the footpads

Refer to section

2.9.2 Chassis footpads

for instructions on removing the footpads.

3.2

Attaching the inner rail to the server

1. Slide out the inner rail from the rackmount rail kit.
2. Align the screw holes on the inner

rail and the chassis top, and then

secure the inner rail to the chassis

top with screws.

3. Repeat the previous steps to

secure the other inner rail to the

bottom of the chassis with screws.

Содержание TS500-E5





































































































































































Результаты поиска

Содержание TS500-E5

Отзывы:

Похожие инструкции для TS500-E5

Бренды по названию

Популярные бренды

Asus TS500-E5, Руководство пользователя

Результаты поиска

Содержание TS500-E5

Отзывы:

Похожие инструкции для TS500-E5

Бренды по названию

Популярные бренды