Asus T-P5G43 Скачать руководство пользователя страница 12

Страница: 12 / 104

1-2

Chapter 1: System introduction

1.1

Welcome!

Thank you for buying an ASUS T-P5G43!
ASUS T-P5G43 is an all-in-one barebone system with a versatile home

entertainment feature.

The system comes in a stylish mini-tower casing, and powered by an ASUS

motherboard that supports the Intel

processor in the 775-land package with

800/1066/1333 MHz FSB and up to 8 GB system memory.

With audio functions, extensive connectivity, and Gigabit LAN capability, the

T-P5G43 is designed for the sophisticated.
With these and many more, the T-P5G43 definitely delivers the cutting edge

technology for your computing and multimedia needs!

Internal

External

1.2

Front panel

The front panel includes the system control button, system LEDs, and LED panel.

The storage card reader slots, and several I/O ports are located inside the front

panel cover.

1.2.1

T3-P5G43 front panel

Содержание T-P5G43









































































































Результаты поиска

Содержание T-P5G43

Отзывы:

Похожие инструкции для T-P5G43

Бренды по названию

Популярные бренды

Asus T-P5G43, Руководство пользователя

Результаты поиска

Содержание T-P5G43

Отзывы:

Похожие инструкции для T-P5G43

Бренды по названию

Популярные бренды