Asus RT-AC86U страница 81 Скачать руководство пользователя

Страница: 81 / 140

4.3.6 DDNS

Setting up DDNS (Dynamic DNS) allows you to access the router
from outside your network through the provided ASUS DDNS
Service or another DDNS service.

To set up DDNS:

1. From the navigation panel, go to

Advanced Settings

WAN

DDNS

tab.

2. Configure the following settings below. When done, click

Apply

•

Enable the DDNS Client

: Enable DDNS to access the ASUS

router via the DNS name rather than WAN IP address.

•

Server and Host Name

: Choose ASUS DDNS or other DDNS.

If you want to use ASUS DDNS, fill in the Host Name in the
format of xxx.asuscomm.com (xxx is your host name).

• If you want to use a different DDNS service, click FREE TRIAL

and register online first. Fill in the User Name or E-mail
Address and Password or DDNS Key fields.

Содержание RT-AC86U













































































































































Результаты поиска

Содержание RT-AC86U

Отзывы:

Похожие инструкции для RT-AC86U

Бренды по названию

Популярные бренды

Asus RT-AC86U, Руководство пользователя

Результаты поиска

Содержание RT-AC86U

Отзывы:

Похожие инструкции для RT-AC86U

Бренды по названию

Популярные бренды